Plx-devices SM-FP Manuel d'utilisateur télécharger pdf

Users Guide: iMFD Sensor Module

Version 1.0 March 14, 2008

www.plxdevices.com

(408)745-7591

iMFD Sensor Module SM-Fluid Pressure

*Please read the instructions completely through at least once before proceeding with the

installation to minimize errors.

*DO NOT use this sensor for Fuel Pressure sensing purpose

*Double check polarity of power before powering it on for the first time.

Overview:

(Figure 1) (Figure 2)

1. Connects to 12V-18V power source.

2. Analog outputs (0-5V linear output) *For sensor #1 ONLY

3. Termination jumper. Closed for first SM in iMFD daisy chain.

4. Connects to next SM in iMFD daisy chain or to first DM

5. Connects to previous SM or unconnected if first SM in iMFD daisy chain

6. Connects to PLX Fluid Pressure Sensor. Up to 2 sensors can be connected for 2 channel operation.

7. Fluid Pressure Sensor (150psi). (*Using a sensor not provided by PLX Devices may lead to inaccurate readings due to a

mismatch in calibration)

8. 24k Gold Ring Terminal

9. Molex Connector Terminals

10. Molex 2 Pin Connector

Install the Fluid Pressure Sensor:

1. The PLX Fluid Pressure probe screws into a 1/8 NPT tap.

2. Connect the fluid pressure sensor with the provided 2 pin Molex connector according to the following diagram. It should

connect to the port “G” on the sensor. Connections can be made by crimping the terminals or soldering the terminals

with the provided wire. *Note the orientation of the Molex 2 pin connector. A reverse connection will result in inaccurate

readings and may damage the device.

1 2 3 4 5 6

Résumé du contenu

Page 1

Users Guide: iMFD Sensor Module Version 1.0 March 14, 2008 Version 1.0 March 14, 2008 www.plxdevices.com (408)745-7591 iMFD Sensor Module SM-Fluid

Page 2 - POWERING ON

Users Guide: iMFD Sensor Module Version 1.0 March 14, 2008 www.plxdevices.com (408)745-7591 (Figure 3a) (Figure 3b, Port “G”) Connecting Po

Page 3 - Output Voltage

Users Guide: iMFD Sensor Module Version 1.0 March 14, 2008 www.plxdevices.com (408)745-7591 (Figure 5) Using the Sensor Module Analog Output: 1. Th

Page 4

Users Guide: iMFD Sensor Module Version 1.0 March 14, 2008 www.plxdevices.com (408)745-7591 While the power input of the lamp and buzzer can be 1

Page 5

Users Guide: iMFD Sensor Module Version 1.0 March 14, 2008 www.plxdevices.com (408)745-7591 Recommended Accessory: (Figure 10) DM-5 Fluid Press

Page 6 - Revision History

Users Guide: iMFD Sensor Module Version 1.0 March 14, 2008 www.plxdevices.com (408)745-7591 LIMITED WARRANTY PLX Devices Inc. warrants this produc

Commentaires sur ces manuels

Pas de commentaire

Plx-devices SM-FP Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Plx-devices SM-FP. PLX Devices SM-FP User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Plx-devices SM-FP